2020 Kawasaki Z900RS Cafe for Sale

Chassis Management Technology

• ABS (ANTI-LOCK BRAKE SYSTEM): Kawasaki ABS systems use front and rear wheel sensors to constantly monitor wheel speed. Should information from either of the sensors indicate that wheel lock has occurred, the ABS ECU directs the pump in the ABS unit to modulate brake fluid pressure (releasing and reapplying pressure so that traction can be regained) until normal operation resumes. ABS offers rider reassurance that contributes to greater riding enjoyment.
• ERGO-FIT®: Proper fit is key for rider comfort and control. However, the ideal fit varies from rider to rider, depending on their physical dimensions and riding style. ERGO-FIT® is an interface system designed to allow riders to find their ideal riding position. Various points of the chassis interface (the handlebar, footpegs and seat, etc.) can be adjusted through a combination of interchangeable parts and parts with adjustable positions. This enables a wide range of riders to find a riding position that offers both comfort and control. Feeling at one with their machine, they will be able to experience how Kawasaki machines are fun and rewarding to ride. *Adjustable parts and their range of adjustability vary by model.
• HORIZONTAL BACK-LINK REAR SUSPENSION: Compared to the Kawasaki traditional Uni-Trak® rear suspension, which mounts the shock unit vertically, with Horizontal Back-link Rear Suspension, the shock unit is almost horizontal. The original Kawasaki suspension arrangement locates the shock unit very close to the bike's center of gravity, greatly contributing to mass centralization. And because there is no linkage or shock unit protruding beneath the swingarm, this frees up space for a larger exhaust pre-chamber (an exhaust expansion chamber situated just upstream of the silencer). With a larger pre-chamber, silencer volume can be reduced, and heavy exhaust components can be concentrated closer to the center of the bike, further contributing to mass centralization. The result is greatly improved handling. A secondary benefit is that the shock unit is placed far away from exhaust heat. Because it is more difficult for heat from the exhaust system to adversely affect suspension oil and gas pressure, suspension performance is more consistent.

Engine Management Technology

• ASSIST & SLIPPER CLUTCH: Based on feedback from racing activities, the Assist & Slipper Clutch uses two types of cams (an assist cam and a slipper cam) to either drive the clutch hub and operating plate together or apart. Under normal operation, the assist cam functions as a self-servo mechanism, pulling the clutch hub and operating plate together to compress the clutch plates. This allows the total clutch spring load to be reduced, resulting in a lighter clutch lever feel when operating the clutch. When excessive engine braking occurs – as a result of quick downshifts (or an accidental downshift) – the slipper cam comes into play, forcing the clutch hub and operating plate apart. This relieves pressure on the clutch plates to reduce back-torque and helps prevent the rear tire from hopping and skidding. This race-style function is particularly useful when sport or track riding.
• DUAL THROTTLE VALVES: Late-model sport bikes often use large-bore throttle bodies to generate high levels of power. However, with large diameter throttles, when a rider suddenly opens the throttle, the unrestricted torque response can be strong. Dual throttle valve technology was designed to tame engine response while contributing to performance. On models with dual throttle valves, there are two throttle valves per cylinder: in addition to the main valves, which are physically linked to the throttle grip and controlled by the rider, a second set of valves, opened and closed by the ECU, precisely regulates intake airflow to ensure a natural, linear response. With the air passing through the throttle bodies becoming smoother, combustion efficiency is improved and power is increased.
• ECONOMICAL RIDING INDICATOR: Using high-precision electronic control for engine management, Kawasaki models can achieve a high level of fuel efficiency. However, fuel consumption is greatly affected by throttle use, gear selection, and other elements under the rider's control. The Economical Riding Indicator is a function that indicates when current riding conditions are consuming a low amount of fuel. The system continuously monitors fuel consumption, regardless of vehicle speed, engine speed, throttle position and other riding conditions. When fuel consumption is low for a given speed (i.e. fuel efficiency is high), an "ECO" mark appears on the instrument panel's LCD screen. By riding so that the "ECO" mark remains on, fuel consumption can be reduced. While effective vehicle speed and engine speed may vary by model, paying attention to conditions that cause the "ECO" mark to appear can help riders improve their fuel efficiency – a handy way to increase cruising range. Further, keeping fuel consumption low also helps minimize negative impact on the environment.
• KTRC (KAWASAKI TRACTION CONTROL): KTRC, Kawasaki's advanced traction control system provides both enhanced sport riding performance and the peace of mind to negotiate slippery surfaces with confidence. Multiple rider-selectable modes (the number of modes varies by model) offer progressively greater levels of intrusion to suit the riding situation and rider preference. Less intrusive modes maintain optimum traction during cornering. Designed with sport riding in mind, they facilitate acceleration out of corners by maximizing forward drive from the rear wheel. And because Kawasaki’s sophisticated software bases its dynamic analysis on the chassis’ orientation relative to the track surface (rather than relative to a horizontal plane), it is able to take into account corner camber, gradient, etc., and adapt accordingly. In the more intrusive modes (and for some models, in any mode), when excessive wheel spin is detected, engine output is reduced to allow grip to be regained, effectively enabling riders to negotiate both short, slippery patches (train tracks or manhole covers) and extended stretches of bad roads (wet pavement, cobblestone, gravel) with confidence. Models equipped with IMU incorporate chassis-orientation feedback to offer even more precise management.
• SOUND TUNING: Kawasaki has long had a reputation for building great-sounding bikes – a characteristic inherent in the Kawasaki engine architecture – but it is only recently that effort has been put into crafting a specific auditory experience through careful sound tuning of either the intake or exhaust system. Designed specifically to allow riders to enjoy their motorcycles aurally as well as physically, the carefully crafted auditory notes can be the key components of the street riding exhilaration offered by models that have benefitted from sound tuning. Sound tuning can include conducting sound research, designing intake and exhaust system components based on an acoustic test carried out in a sound room, and careful consideration of every detail of a system’s components to ensure a balance of performance and the desired sound.

Other Features

• Authentic retro styling, iconic teardrop fuel tank, tuned exhaust with brushed finish, bullet shaped analogue dials, Café-racer style front cowl, vintage graphics.

Power & Performance

• THE PERFECT BALANCE: The combination of a lightweight trellis frame and powerful engine allows the Z900RS motorcycle to achieve a superb balance of power and handling.
• SMOOTH & POWERFUL: The powerful inline four delivers strong acceleration and silky-smooth performance for cruising at higher rpm.
• TUNED EXHAUST NOTE: Tuned to deliver a satisfying rumble during engine start and idling.
• COMFORTABLE FOR LONG RIDES: Seat is well cushioned and comfortable for extended highway cruising and enhanced road bump absorption.

Retro Styling

• AUTHENTIC Z1 STYLING: The Z900RS motorcycle is the ultimate retro-sport Z that offers modern running gear and classic styling.
• STAINLESS STEEL: Double-walled headers, integrated connections and short megaphone silencer—all treated to a buffed finish to highlight the Z900RS motorcycle’s retro-sport image.
• MODERN & BRIGHT: A round LED headlight and oval surface-emitting LED taillight pay homage to the original Z1 motorcycle with a blend of retro and modern designs.
• HIGH-GRADE & VINTAGE: The high-tech multi-function LCD screen nestles between bullet-shape analogue dials, creating a balance of retro style and modern functionality.
• CLASSIC SPOKE STYLE: A classic look with machining on the spokes and rim plus high-quality paint demonstrates superb craftsmanship.

Rider Experience

• AUTHENTIC RIDING EXPERIENCE: Retro design meets modern technology and performance for superb riding comfort around town and on the highway.
• STRENGTH & FLEXIBILITY: The modern lightweight trellis frame provides strength to harness the inline 4-cylinder power and balanced flex to achieve responsive and agile handling.
• EASY RIDING: A relaxed upright riding position accommodates both comfortable cruising and sporty riding. A low seat height allows an easy reach to the ground while an upright handlebar position adds leverage for cornering and low-speed maneuvering.
• RELIABLE & MODERN: Powerful braking performance featuring a firm, progressive feel is helped by modern radial-mount calipers and a radial-pump brake master cylinder. A compact and lightweight Nissin motorcycle ABS unit helps reduce wheel lock-up under certain conditions.
• COMFORTABLE & RESPONSIVE: A fully adjustable 41mm inverted front fork and a horizontal back-link rear suspension offer progressive damping that delivers both ride comfort and sporty performance.